How To Remove Window Tint With A Heat Gun

It'south time to get rid of that erstwhile window tint on your car. Maybe it's old, bubbling, scratched, or discolored … need nosotros say more? It has to go. And why waste money taking your auto to the shop when you tin can easily remove your window tint at home.

There are multiple means to remove window tint, but after our research, we determined that using heat is the most effective and practical way to become near information technology. Using rut is easy and clean. Rut also will help you remove almost of the window tint's glue adhesive in the process.

How To Remove Window Tint In Three Easy Steps

First, yous volition need a heat gun or a powerful high heat hairdryer and a razor blade scraper tool with a sharp blade.

1. Find the edge of the window tint. Using the razor blade, choice at the edge of the tint until you can loosen an edge that is large enough for you to grab with your fingers. Corners are a good place to outset. Be careful when using the razor bract then you don't scratch the glass. Hold the razor shut to the window and scrape at a low angle.

2. Apply estrus to the tint that you desire to remove. A oestrus gun will work best for this procedure, merely a good hairdryer on the highest heat setting can piece of work too. Hold your oestrus source about two inches away from the drinking glass and apply the rut in circular motions. Do not concord the heat in 1 spot for too long, and only utilize rut to the film you lot are almost to pull away from the window.

3. Pull slowly while the window tint is warm. The tint should pare away easily. It should as well remove nearly of the glue adhesive off of your car window every bit the tint film is peeled abroad. Do not pull off the picture show while it is cold, otherwise, you will be left with a sticky residuum on your window. Continue working your style down or beyond your window, heating and peeling the tint as you become until you tin can pull the entire slice of window tint costless.

How to Remove Window Tint

1. Find the edge of the window tint.

2. Utilise heat to the tint that yous want to remove.

3. Pull slowly while the window tint is warm.

Window Tint Removal Tips and Tricks

If all goes to programme post-obit these three steps, your window tint should come off in a unmarried canvass. However, we know that not everything goes as smoothly every bit you'd like when working on your motorcar, so beneath are a few pointers on how to end the procedure if the removal doesn't exactly get to programme.

How to remove any sticky glue adhesive from your windows:

• Make sure your razor blade is new and precipitous; an old or rusty razor blade will likely go out marks on your window.
• Use the razor blade at an angle and gently scrape the adhesive off of the glass. Again, be careful non to scratch the drinking glass. The balance should come off on the razor blade, which you can periodically wipe clean until you lot are done.
• Once all the glue is gone, use a glass cleaner and a microfiber towel to clean the window. Information technology should look every bit good every bit new!

How to remove window tint if information technology extends below the door panel or behind other trim pieces:

• Using the aforementioned method every bit above, utilise heat on the film, focusing on where it tucks behind the door console or trim slice.
• Slowly pull the tint upwards while it is warm, carefully peeling the function below the trim upwardly equally you go.
• Do non pull the tint while it is cold. The film may tear, leaving a strip of tint stuck beneath the trim. If this happens, y'all may need to remove the door panel or trim piece to fully remove any remaining tint.

Source: https://autowise.com/how-to-remove-window-tint-the-complete-guide/

Share this post